Free CIPS Whole Life Asset Management L4M7 Exam Questions

Below is a formula from Toyota you can use to make an informed decision.

1. Start with the basic right-angle stacking width

2. Add the load length

3. Add 12 inches for clearance

The basic right-angle stacking width is the smallest amount of space a forklift needs turn in order to insert its forks into a pallet. You can find basic right-angle stack measurements in the equipment manual or by contacting TMHNC if your business is located in Northern California. This measurement does not include the length of the load or room need for clearance.

Load lengths vary depending on your application, products, etc. As a starting point, a standard pallet has a 48-inch load length. Always check your forklift's data plate for the rated capacity (which is affected by attachments and other factors).

Adding 12 inches for clearance ensures you have enough room for your forklift's turn radius and helps protect against damage from operator error and/or product that may hang over the edge of the pallet.

- CIPS study guide page 29-30

- How to Calculate Forklift Aisle Width Minimums

LO 1, AC 1.1

Material requirement planning (MRP) is a production planning and material (inventory) control system used in manufacturing. Objectives of MRP are to ensure materials are available for production while minimising inventory and to plan production and procurement activities.

MRP process is described in the graph below:

LO 2, AC 2.3

A cost-benefit analysis is a process businesses use to analyze decisions (such as capital investment). The business or analyst sums the benefits of a situation or action and then subtracts the costs associated with taking that action.

A cost-benefit analysis (CBA) should begin with compiling a comprehensive list of all the costs and benefits associated with the project or decision.

The costs involved in a CBA might include the following:

- Direct costs would be direct labor involved in manufacturing, inventory, raw materials, manufacturing expenses.

- Indirect costs might include electricity, overhead costs from management, rent, utilities.

- Intangible costs of a decision, such as the impact on customers, employees, or delivery times.

- Opportunity costs such as alternative investments, or buying a plant versus building one.

- Cost of potential risks such as regulatory risks, competition, and environmental impacts.

Benefits might include the following:

- Revenue and sales increases from increased production or new product.

- Intangible benefits, such as improved employee safety and morale, as well as customer satisfaction due to enhanced product offerings or faster delivery.

- Competitive advantage or market share gained as a result of the decision.

An analyst or project manager should apply a monetary measurement to all of the items on the cost-benefit list, taking special care not to underestimate costs or overestimate benefits. A conservative approach with a conscious effort to avoid any subjective tendencies when calculating estimates is best suited when assigning a value to both costs and benefits for a cost-benefit analysis.

Finally, the results of the aggregate costs and benefits should be compared quantitatively to deter-mine if the benefits outweigh the costs. If so, then the rational decision is to go forward with the project. If not, the business should review the project to see if it can make adjustments to either increase benefits or decrease costs to make the project viable. Otherwise, the company should likely avoid the project.

- Cost-Benefit Analysis (Investopedia)

- CIPS study guide page 175

LO 3, AC 3.2

Holding costs include expenses associated with storing inventory. These typically comprise:

Damaged goods: Losses due to items being stored improperly or deteriorating over time.

Storage space: Costs of renting or maintaining warehouse space.

Insurance: Fees for insuring stored items against potential risks.

These costs are integral to whole-life asset management, as they impact overall inventory and storage expenses.

Decommissioning or disposal should start with the original specifications of the assets so that the organisation and supplier can make an appropriate plan. Some specifications also mention the is-sues regarding to end-of-life environmental factors.

LO 3, AC 3.3

Fixed assets may be sold anytime during their useful life. This gives rise to the need to derecognize the asset from balance sheet and recognize any resulting gain or loss in the income statement.

The accounting for disposal of fixed assets can be summarized as follows:

- Record cash receive or the receivable created from the sale:

Debit Cash/Receivable

- Remove the asset from the balance sheet

Credit Fixed Asset (Net Book Value)

- Recognize the resulting gain or loss

Debit/Credit Gain or Loss (Income Statement)

Example

ABC LTD purchased a machine for $2000 on 1st January 2001 which had a useful life of 5 years and an estimated residual value of $500. The machine was being depreciated on straight line basis. However, ABC LTD decided to sell the asset on1 January 2003 for $1500 in order to raise cash for the purchase of a new machine.

The disposal of the fixed asset will be recorded as follows:

Record cash received or the receivable arising from the sale:

Debit Cash $1,500

Remove the asset from the balance sheet

As a fixed asset is recognized in the balance sheet at the Net Book Value (i.e. Cost less Accumulated Depreciation), the machine will be removed from the accounts of ABC LTD in two parts:

First, the Machine Cost must be removed by crediting the ledger:

Credit Machine Cost $2,500

Second, the Accumulated Depreciation in respect of the machine must be removed by debiting the ledger:

Debit Accumalated Depreciation $600*

*Accumulated Depreciation: (2000 - 500)/5 x 2 Years

The combined effect of the above two transactions would be to remove the machine's net book value of $1400 (2000 - 600) from the balance sheet.

Recognize the resulting gain or loss on the sale of machine

ABC LTD received $1500 for an asset with a balance sheet worth of $1400. It therefore earned a gain of $100. The gain will be recorded as follows:

Credit Gain on Disposal $100

- Accounting for Disposals

- CIPS study guide page 197-198

LO 3, AC 3.3

There are several methods to reduce the acquisition costs in procurement. L4M7 study guide lists the following methods:

- Buyer discretionary spend

- 'User buying'

- Vendor managed inventory (VMI)

- Two-bin Kanban

- Product catalogue

- e-Procurement techniques, including some systems such as ERP, procure-to-pay (P2P), e-requisition, e-tendering, etc.

- Procurement cards

LO 3, AC 3.1

In management accounting, reorder level (or reorder point) is the inventory level at which a com-pany would place a new order or start a new manufacturing run.

Reorder level depends on a company's work-order lead time and its demand during that time and whether the company maintain a safety stock.

If a company maintains a safety stock, reorder level calculation changes are follows:

Reorder Level = Average Demand Lead Time + Safety Stock

LO 2, AC 2.3

The ISO 14000 family of standards are developed by ISO Technical Committee ISO/TC 207 and its various subcommittees. For a full list of published standards in the series see their standards catalogue. ISO 14001 provides requirements with guidance for use that relate to environmental systems. Other standards in the family focus on specific approaches such as audits, communications, labelling and life cycle analysis, as well as environmental challenges such as climate change.

ISO 27000 family of standards concerns information technology, with the goal of improving security and protecting company assets. Started in 2005, the two most popular standards are ISO 27001:2013 and 27002:2013. 27001 is management-based system, whereas 27002 is a technical document, focused on the individual and putting a code of conduct in place. Organizations can choose either standard; ISO 27001 has over 22,000 certifications worldwide. It is a broad standard, and for this reason the certification can be customized to fit the needs of the organization, and is not mandatory.

ISO 22000 sets out the requirements for a food safety management system and can be certified to it. It maps out what an organization needs to do to demonstrate its ability to control food safety hazards in order to ensure that food is safe. It can be used by any organization regardless of its size or position in the food chain.

ISO 9001 is a family of quality management standards, there are fourteen in total. Of these, ISO 9001:2015 is the only one that can be certified to. It was first published in 1987, and has since been updated about every 7 years. The standard details how to put a Quality Management System (QMS) in place to better prepare your organization to produce quality products and services. It is customer focused, and places an emphasis on continuous improvement and top management processes that extended throughout the organization.

- ISO website

- Top 10 Most Popular ISO Standards

- CIPS study guide page 193

LO 3, AC 3.3

Subjective forecasting methods, like market research and expert opinion, rely on qualitative judgment rather than numerical data. These methods are valuable when historical data is limited, or when anticipating market changes. Whole-life asset management may use subjective forecasts for long-term planning and to account for factors not captured in quantitative data.

The holding cost per day of the beer pallet is equal to 1.50/2=0.75

The beer pallet is stored for 5 days, the total holding cost is: 0.75*5=3.75.

LO 2, AC 2.2

Purchase order lead time (POLT) refers to the number of days from when a company places an order for production inputs it needs, to when those items arrive at the manufacturing plant.

LO 2, AC 2.3

Dependent demand is the requirement for stock item which is directly related to and therefore de-pendent upon the rate of production (examples are: raw materials, components, energy)

Independent demand is the requirement for stock item which is not directly related to, and is therefore independent of rate of production. Although independent demand is called thus, it can still be influenced by economic factors external to the demand-supply model such as general consumer sentiment and consumers' available disposal income. However, businesses that need to predict the number of products with independent demand needed to sate their customers have it easier than businesses that must calculate the demand for products with dependent demand because there are fewer factors to consider.

In this scenario, the new drug is finished good which is dependent on the demand of the market, and the firm needs to forecast before initiating the production process. The item is independent from rate of production, therefore, it must be independent demand item.

LO 2, AC 2.1