Free CWNP Certified Wireless Design Professional Exam CWDP-305 Exam Questions

What advantages are provided by per-user PSKs when compared with ESS-wide PSKs?(Choose all that apply.)

Response:

When you see the SKINNY protocol in a post-install validation protocol capture, what does this indicate?

Your customer uses PSK authentication but needs a more secure, certificate-based solution requiring certificates on both the client and server. Which EAP method is the most appropriate?

What commonly causes a client-to-AP link imbalance?

As you plan a WLAN upgrade, you have assessed the network requirements and data signatures of your applications. One of the popular

applications used on your network requires high bandwidth and low to medium Wi-Fi loss, but can tolerate moderate latency and jitter.

What application matches this description?

Your customer requires a security solution where client credentials are used, not a Protected Access Credential (PAC), and the authentication server must have a certificate with optional client certificate use. Which EAP (Extensible Authentication Protocol) method is the best fit for these requirements?

You are working on a VoWLAN design with your customer's wired networking team. How many distinct priority levels do you expect for the voice

applications?

HR/DSSS specifies the following PHY rates:

Response:

An engineering firm just upgraded their WLAN form nine 802.11n APS to nine 802.11ac APs. After this upgrade, they did not see any improvement

in throughput.

What is the most likely cause of this result?

Using a SCA means that all APs will be using the same channel in a given layer. How is the AP with which the client associates determined?

Response:

Which one of the following might be detected as a source of CCI during a post-validation survey in the 5 GHz band?

While conducting a site survey in a heavy machinery repair facility, what essential gear should you use for safety in this challenging environment?

During a public Wi-Fi session with 10 other users, you run a ping sweep but cannot detect any devices on your subnet. What feature is likely enabled on the WLAN infrastructure to prevent local communication between clients?

You are site surveying a network for VoWiFi. You have positioned an AP for a manual survey and are moving away from the AP with a phone in

Survey Mode in your hand and you are reading the RSSI value of the signal received from the AP. You have previously determined that the noise

floor was approximately -94 dBm on this floor of the building. The phones documentation does not specify a recommended RSSI or SNR value for

best performance.

Based on the information provided and the type of device (VoWiFi phone) you are deploying, what minimum RSSI should you plan for in all areas

you are monitoring and where VoWiFi service is desired?

What important item is often left out of operational and maintenance plans?

Response: