Limited-Time Offer: Enjoy 50% Savings! Coupon code: 50OFF Use it at checkout
Skip to content

Free NetApp Certified Data Administrator, ONTAP NS0-165 Exam Questions

Page: 1 / 6 Total 60 questions

Want more questions? Get Premium Access.

Question 1

You manage a NetApp ONTAP cluster and must restore a complete bucket from a NetApp ONTAP S3 snapshot.

Which NetApp tool should you use?

Correct Answer: C. ONTAP CLI
Explanation:

The ONTAP CLI provides the vserver object-store-server bucket snapshot restore start command to restore an entire S3 bucket from a selected ONTAP S3 snapshot. NetApp documents ONTAP S3 snapshots as unsupported in System Manager. While modern releases of ONTAP System Manager support basic creation and management of S3 object store servers, users, and buckets, advanced object-store restoration commands---specifically restoring an entire bucket from a point-in-time S3 bucket snapshot---are explicitly managed and initiated through the ONTAP Command Line Interface (CLI).

System Manager does not provide the workflow dialog to initiate full bucket restoration from an S3 snapshot. SnapCenter software is designed for application-consistent backup and recovery of enterprise databases, hypervisors, and file systems, rather than ONTAP native S3 bucket snapshots. Active IQ Unified Manager is an alerting and performance monitoring dashboard with no administrative restore orchestration for S3 buckets.


Question 2

An administrator wants to make sure that all HA traffic between the HA nodes is encrypted. What is configured before HA encryption can be enabled?

Correct Answer: B. external key manager
Explanation:

In NetApp ONTAP high-availability configurations, nodes in an HA pair continually synchronize volatile memory states, NVRAM journaling, and control metadata across high-speed interconnect links. To safeguard this data across the interconnect against interception, ONTAP supports encryption of HA partner traffic.

Before HA-pair interconnect traffic encryption can be enabled, the cluster must be configured with an external key manager (EKM) using the Key Management Interoperability Protocol (KMIP). Because HA interconnect encryption secures the underlying communications between the nodes before internal node security subsystems or onboard key storage can be fully reconciled during node initialization and failover events, external key management is a mandatory architectural prerequisite. An Onboard Key Manager (OKM) stores keys locally within each node's boot media and replicated cluster database, making it unsuitable for arbitrating keys for HA interconnect traffic encryption. TLS certificates manage web and API endpoints, and a separate IPspace manages data network isolation rather than internal node interconnect security.


Question 3

Which two hypervisors does NetApp ONTAP Select MetroCluster SDS support? (Choose two)

Correct Answer: A. Kernel-Based Virtual Machine; D. VMware ESXi
Explanation:

NetApp ONTAP Select delivers a software-defined storage (SDS) implementation of ONTAP running as a virtualized appliance on commodity x86 server hardware. For environments requiring disaster recovery and high availability across campus distances, NetApp offers ONTAP Select MetroCluster SDS, which provides synchronous data mirroring and automated failover capabilities across two separate physical locations.

ONTAP Select MetroCluster SDS supports two hypervisor platforms:

VMware ESXi (Statement D): VMware vSphere environments utilizing vSphere Standard/Enterprise Plus hypervisors.

KVM - Kernel-Based Virtual Machine (Statement A): Linux environments utilizing supported enterprise distributions (such as Red Hat Enterprise Linux).

Citrix XenServer (Statement B) and Microsoft Hyper-V (Statement C) are not supported hypervisors for ONTAP Select MetroCluster SDS configurations. Deployments on ESXi and KVM are provisioned and managed using the NetApp ONTAP Deploy utility, which automates virtual machine creation, disk pool allocation, node clustering, and mediator node assignments for split-brain avoidance.


Question 4

When adding nodes to an existing 2-node cluster, which feature is automatically disabled?

Correct Answer: C. cluster HA
Explanation:

In NetApp ONTAP, a specialized configuration known as cluster HA (high availability) is applied strictly to two-node clusters. In a two-node cluster, both nodes serve as mutual quorum partners, and cluster HA eliminates the requirement for dedicated external cluster interconnect switches by allowing switchless cluster networking. Additionally, it adjusts cluster quorum management heuristics to handle single-node losses without requiring an independent third-party tiebreaker.

When an administrator expands the environment by adding a second High Availability (HA) pair or additional nodes to the cluster, the cluster transitions into a multinode (four or more nodes) switched cluster topology. At this point, the standard distributed quorum voting algorithms take over, and ONTAP automatically turns off cluster HA (cluster ha modify -configured false). Storage aggregate relocation (ARL) remains an active operational feature used during maintenance and nondisruptive upgrades. CFO (Controller Failover) and SFO (Storage Failover) represent foundational HA aggregate ownership failover mechanisms that continue operating to ensure continuous data availability across all HA pairs in the expanded cluster.


Question 5

Which NetApp administration utility delivers installation, management, and mediator services for NetApp ONTAP Select?

Correct Answer: B. ONTAP Deploy
Explanation:

NetApp ONTAP Deploy is the dedicated administrative virtual appliance designed specifically for the lifecycle management of NetApp ONTAP Select software-defined storage environments. ONTAP Deploy is packaged as a ready-to-run virtual machine that administrators deploy on VMware ESXi or KVM hypervisors.

ONTAP Deploy automates every stage of the ONTAP Select lifecycle. It handles hypervisor host verification, network validation, license pool management, and automated provisioning of virtual storage nodes. Furthermore, for two-node High Availability (HA) ONTAP Select clusters, ONTAP Deploy delivers the integrated mediator service. The mediator acts as an independent quorum tiebreaker to prevent split-brain scenarios and automate unplanned failovers if one virtual node fails. SnapCenter software provides centralized, application-consistent backup and recovery for databases and hypervisors. ONTAP System Manager is the local web UI for day-to-day cluster administration once nodes are online, and NetApp Console provides broad cloud management.


Question 6

Which two networking components must be configured to enable LIF failover across subnets? (Choose two)

Correct Answer: A. VIP; C. BGP
Explanation:

In standard NetApp ONTAP networking, traditional data LIFs are constrained to migrate and fail over strictly within their assigned broadcast domain and Layer 2 subnet boundary. If a LIF migrates to a network interface on a different subnet, client connectivity breaks because the IP address of the LIF is no longer reachable from the original local gateway.

To overcome this Layer 2 boundary and enable seamless, automated LIF failover across different routed subnets and availability zones, ONTAP utilizes two critical networking components:

Virtual IP (VIP) Data LIFs (Statement A): VIP LIFs are logical interfaces whose IP addresses reside outside the local subnet of any physical port. Instead of relying on local Layer 2 ARP broadcasts, VIP LIFs use host route (/32 IPv4 or /128 IPv6) announcements.

Border Gateway Protocol / BGP (Statement C): ONTAP runs an integrated BGP control plane router that peers with upstream network routers. When a VIP data LIF fails over or migrates to a node residing in a different physical failure domain or subnet, ONTAP dynamically announces the updated next-hop host route to the network routers via BGP. This ensures client packets are immediately redirected over the IP fabric to the surviving node without service disruption.

VLANs provide Layer 2 broadcast domain segmentation, and LACP provides link aggregation; neither enables cross-subnet IP failover.


Question 7

Where can a customer verify the end-of-support status of a NetApp AFF controller?

Correct Answer: C. Hardware Universe
Explanation:

The NetApp Hardware Universe (HWU) is the authoritative, definitive technical repository and configuration guide for all NetApp physical hardware, expansion shelves, media components, and controller platforms. Storage architects and administrators use HWU to look up hardware component limits, maximum storage capacities, power consumption ratings, supported expansion cabling, and crucial lifecycle dates.

Within the Hardware Universe, administrators can review the official Hardware Lifecycle Matrix to verify the current lifecycle stage of any NetApp All-Flash FAS (AFF) or FAS controller model. This includes critical dates such as End of Sale (EOS), End of Support (EOPS), and End of Engineering Support (EOES). The NetApp Interoperability Matrix Tool (IMT) is utilized to validate end-to-end component compatibility between ONTAP versions, host operating systems, HBAs, hypervisors, and SAN fabrics. ONTAP System Manager is an operational management interface for a running cluster and does not publish public lifecycle dates. NetAppDocs provides general technical product documentation, feature guides, and CLI manuals rather than real-time hardware lifecycle lookup matrices.


Question 8

Which feature is enabled by default on newly created storage units after upgrading an existing cluster to NetApp ONTAP 9.18.1 software?

Correct Answer: B. ARP/AI
Explanation:

NetApp ONTAP 9.18.1 introduces substantial enhancements to native cybersecurity, prominent among which is the expansion and default enablement of Autonomous Ransomware Protection with Artificial Intelligence (ARP/AI). While earlier implementations of Autonomous Ransomware Protection required manual provisioning and extended heuristic learning modes, ONTAP 9.18.1 embeds advanced AI-driven behavioral models directly into the file and block storage subsystems.

On newly deployed systems or existing clusters upgraded to NetApp ONTAP 9.18.1 (notably across modern All-Flash and All-SAN Array r2 architectures), ARP/AI is automatically enabled by default on all newly created storage units and volumes following a standard upgrade grace period. ARP/AI continuously analyzes read/write I/O patterns, file entropy metrics, and burst volume mutations in real time to spot zero-day ransomware attacks. Upon detecting abnormal encryption patterns, ARP/AI immediately generates high-priority EMS alerts and automatically takes an un-deletable, clean snapshot to guarantee immediate recovery without data loss. Storage Quality of Service (QoS) policies and SnapMirror data protection require deliberate administrative provisioning and policy assignment. Drive and volume-level encryption depend on configured key managers and storage efficiency templates rather than universal automatic default enablement on all newly provisioned units.


Question 9

An administrator has presented a thin-provisioned iSCSI LUN to an ESXi host. The administrator deleted data from the datastore in ESXi, but no blocks were freed on the LUN.

Which two steps should you use to resolve this issue? (Choose two)

Correct Answer: A. Use the vmfs unmap command.; C. Set the space allocation to enabled.
Explanation:

When virtual machines or files are deleted from a VMware ESXi VMFS datastore backed by a thin-provisioned ONTAP LUN, the underlying storage system is unaware that blocks have been discarded unless SCSI UNMAP primitives are exchanged. In thin-provisioned SAN environments, resolving this block reclamation failure requires two essential steps:

Set the space allocation to enabled (Statement C): In ONTAP, the LUN must have space allocation turned on (lun modify -vserver -path -space-allocation enabled). This setting instructs the ONTAP SCSI target to support and process the T10 SCSI UNMAP primitive, enabling the storage array to deallocate and free underlying 4KB blocks in the volume. If space allocation is disabled, ONTAP ignores deallocation requests.

Use the vmfs unmap command (Statement A): On the VMware ESXi host, the administrator must initiate space reclamation across the VMFS datastore using the command esxcli storage vmfs unmap (or rely on automated VMFS6 reclamation). This triggers ESXi to send SCSI UNMAP commands to the LUN, identifying deleted blocks so ONTAP can free physical storage.

Rescanning the storage adapter discovers newly mapped LUNs or capacity expansions, but does not trigger block reclamation. The volume is already stated as thin-provisioned, so setting the volume type does not resolve host-to-array UNMAP communication.


Question 10

A storage administrator needs to ensure that critical-workload performance is not degraded by competing workloads in a NetApp ONTAP cluster.

Which two actions accomplish this task? (Choose two)

Correct Answer: B. Set a throughput ceiling on a competing workload.; D. Set a throughput floor for a critical workload.
Explanation:

NetApp ONTAP Storage Quality of Service (QoS) allows administrators to manage and prioritize system resources (IOPS and MBps bandwidth) across multi-tenant environments and mixed workloads, preventing "noisy neighbor" problems from impacting business-critical applications. To protect a critical workload from being degraded by competing, lower-priority workloads, an administrator implements two coordinated QoS policies:

Set a throughput floor for a critical workload (Statement D): An administrator assigns an adaptive or fixed QoS minimum throughput limit (floor) to the critical workload. Supported on All-Flash FAS (AFF) and All-SAN Array (ASA) platforms, a QoS floor ensures that the critical workload receives guaranteed minimum I/O performance and prioritized controller scheduling, even during periods of heavy cluster congestion.

Set a throughput ceiling on a competing workload (Statement B): An administrator applies a maximum throughput limit (ceiling) to aggressive, non-critical background workloads (such as bulk data ingest, reporting scans, or dev/test environments). The ceiling throttles the competing workload if it attempts to exceed its allocated bandwidth or IOPS, protecting shared storage resources.

Setting a ceiling on a critical workload (Statement A) would artificially restrict its performance, and setting a floor on a competing workload (Statement C) would prioritize the competing workload over the critical application.