Which of the following are considered 'transformed resources' and an input into the Operations Process (input- process-output)? Select THREE
Correct Answer:A. customers; B. raw materials; E. information
Explanation:
In the input--transformation--output model, transformed resources are those that are changed by operations. Materials can become finished goods; information can be interpreted or modified by professional services; customers themselves can be transformed through healthcare, education or personal care. Employees and facilities usually perform the transformation and are classified as transforming resources. Money finances the system but is not one of the three standard transformed-resource categories. Effective process design depends on defining customer requirements and selecting resource arrangements that deliver them consistently. Performance measures should capture both resource efficiency and service outcomes, because an apparently economical process can still fail if it does not provide the required output at the right time. The required selections are customers, raw materials and information. These choices address the particular category named in the question, whereas the remaining alternatives describe other activities, dimensions or outcomes. The selected approach should be documented and monitored so that managers can distinguish normal process behaviour from avoidable performance problems.
Study Guide Reference: CIPS L5M9 -- Evaluate operations management processes; the uploaded question bank cites study-guide page(s) 44, 45.
Question 2
Which of the following are operations management activities? Select THREE
Correct Answer:A. process selection; B. materials management; D. capacity planning
Explanation:
Process selection determines how production activities will be configured; materials management coordinates acquisition, movement and storage of inputs; capacity planning establishes the level of resources needed to satisfy expected demand. These are core operations activities. New-product development is commonly shared with design, engineering and marketing, while job design involves both operations and human resources. Functional boundaries overlap in practice, but the three selected areas directly determine how day-to-day production capability is organised. A useful way to assess the choice is to trace how inputs pass through the process and identify where capacity or coordination can fail. This helps management plan equipment, responsibilities and material flows without assuming that the same layout, staffing or control method suits every organisation. The required selections are process selection, materials management and capacity planning. These choices address the particular category named in the question, whereas the remaining alternatives describe other activities, dimensions or outcomes. A clear specification of responsibilities and measurement criteria helps prevent resources being allocated according to assumptions rather than operational requirements.
Study Guide Reference: CIPS L5M9 -- Analyse the role and activities of operations management in organisations; the uploaded question bank cites study-guide page(s) 12.
Question 3
When processing low volumes of a product, specialisation is high and it is therefore possible to create products at a lower unit cost. Is this TRUE?
Correct Answer:C. no- creating products in low volumes often leads to a higher unit cost
Explanation:
Low-volume production often uses general-purpose equipment and flexible labour with less scope for repetitive task specialisation. Setup costs and fixed overhead are distributed across fewer units, increasing average unit cost. High volume can lower unit costs through standardisation, automation and scale, although scale has limits when constraints or complexity grow. Costs do not remain fixed per unit regardless of volume; managers should distinguish fixed total cost from variable cost and average unit cost. The Four Vs---volume, variety, variation and visibility---provide a practical framework for process analysis. Each affects the appropriate mix of automation, labour, inventory and customer contact. Performance should be judged against the demands of the particular process rather than a universal assumption that one configuration is always best. The appropriate selection is no- creating products in low volumes often leads to a higher unit cost. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices.
Study Guide Reference: CIPS L5M9 -- Evaluate operations management processes; the uploaded question bank cites study-guide page(s) relevant module section.
Question 4
In the SERVQUAL model how many different types of gaps should be identified by a service provider?
Correct Answer:C. 5
Explanation:
The SERVQUAL gaps model examines five potential mismatches: management knowledge of expectations, service specifications, service delivery, external communications and the final customer gap between expected and perceived service. Early gaps are internal contributors; the fifth represents customer experience. Organisations can investigate each gap through interviews, operational audits and service measures. The five RATER dimensions---reliability, assurance, tangibles, empathy and responsiveness---are a different part of service-quality analysis and should not be confused with the five gaps. Cross-functional operations depend on timely data and a shared understanding of requirements. Inventory, capacity, scheduling and customer communication must be coordinated, particularly when work crosses organisational or national boundaries. Controls should reflect the risks and service expectations of the sector concerned. The appropriate selection is 5. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. The organisation should also assess the effect on upstream suppliers and downstream users rather than measuring success at only one point in the chain.
Study Guide Reference: CIPS L5M9 -- Analyse the application of operations management across supply chains; the uploaded question bank cites study-guide page(s) 56.
Question 5
JJ Ltd is a sporting goods manufacturer who is based in the UK. It is considering expanding its operations to include manufacturing sites based in South America. Which of the following considerations will JJ Ltd need to consider now that they are becoming an international organisation? Select TWO
Correct Answer:B. cultural aspects; C. quality standards
Explanation:
International manufacturing requires cultural awareness of workforce practices, language, communication and stakeholder expectations. It also requires consistent technical quality standards and compliance with applicable local regulations and customer specifications. A UK sporting-goods producer opening South American facilities must align training, supplier qualification and testing while adapting operational management appropriately. Cost efficiency and design matter in any location, but cross-cultural coordination and differing compliance regimes introduce distinctive challenges when expanding overseas. Cross-functional operations depend on timely data and a shared understanding of requirements. Inventory, capacity, scheduling and customer communication must be coordinated, particularly when work crosses organisational or national boundaries. Controls should reflect the risks and service expectations of the sector concerned. The required selections are cultural aspects and quality standards. These choices address the particular category named in the question, whereas the remaining alternatives describe other activities, dimensions or outcomes. The organisation should also assess the effect on upstream suppliers and downstream users rather than measuring success at only one point in the chain.
Study Guide Reference: CIPS L5M9 -- Analyse the application of operations management across supply chains; the uploaded question bank cites study-guide page(s) 54.
Question 6
Below are details of 4 local manufacturing companies. For each company you must decide what the main objective is for the organisation and what layout their manufacturing plant has.
Company 1: This company creates large, delicate products which are hard to move. The main aim of the company is to stand out from competitors due to the superior level of materials used and by using the latest forms of technology to create the items.
Company 2: This company produces 72 different items and has designated zones within its premises for the creation of each item. The zones are organised based on the technology used and some products may be passed between different zones to be completed. The company creates many different items in response to changing customer demands, with many product lines only lasting a single season.
Company 3: Company 3 creates one product which flows along a single production line, with staff members adding to the product on four different occasions. The company must produce a high volume of this singular product in order to break even. Therefore, there is always a steady flow of items through the plant and it is important there is no stoppage in production.
Company 4: This company produces small batches of products, as and when they are ordered by customers. Due to uncertainty in demand, a high profit margin is added to the cost of each item. Teams in the factory are grouped into different areas depending on the technological process they are using.
Complete the table below by listing the objective criteria and plant layout for each company. Each response should only be used once: flexibility, speed, quality, cost, functional layout, cell layout, product layout, fixed-position layout
Company
Performance objective
Plant layout
Company 1
Box 1
Box 5
Company 2
Box 2
Box 6
Company 3
Box 3
Box 7
Company 4
Box 4
Box 8
Which of the following will you put into box 4?
Correct Answer:D. cost
Explanation:
Company 4 produces small customer-order batches with uncertain utilisation and relatively high margins. Cost is the selected performance criterion in the case comparison because managers must understand setup labour, overhead recovery and the economics of low-volume jobs. High selling margin does not itself prove low production cost; flexible process arrangements can carry high unit costs. Job costing and activity-based costing help establish prices that recover those costs while retaining profitability. Other performance dimensions remain relevant to custom orders. Applied effectively, this distinction supports better allocation of people, facilities and materials. Operations managers should match process configuration to required output and make performance measurable through delivery, resource-use and conformance indicators. A sound arrangement also takes account of safety, maintenance and the consequences of interruption. The appropriate selection is cost. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. A clear specification of responsibilities and measurement criteria helps prevent resources being allocated according to assumptions rather than operational requirements.
Study Guide Reference: CIPS L5M9 -- Analyse the role and activities of operations management in organisations; the uploaded question bank cites study-guide page(s) 4, 17.
Question 7
Managing the supply chain, inventory and the implementation of Lean processes fall under which category of activity of the Operational Process?
Correct Answer:C. delivery
Explanation:
The delivery activity of operations management coordinates the execution of processes by which inputs become outputs and reach customers. Supply-chain coordination ensures materials and goods flow between organisations; inventory control provides required availability; Lean tools remove unnecessary activity and support smoother throughput. Directing establishes strategic priorities, designing establishes process configuration, and developing strengthens future capabilities. These distinctions overlap in practice, but the concrete implementation of supply and inventory practices supports operational delivery. Effective process design depends on defining customer requirements and selecting resource arrangements that deliver them consistently. Performance measures should capture both resource efficiency and service outcomes, because an apparently economical process can still fail if it does not provide the required output at the right time. The appropriate selection is delivery. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. The selected approach should be documented and monitored so that managers can distinguish normal process behaviour from avoidable performance problems.
Study Guide Reference: CIPS L5M9 -- Evaluate operations management processes; the uploaded question bank cites study-guide page(s) 51.
Question 8
At Red Glass Ltd a strategy has been developed by the Operations Department to reduce costs and streamline supply chain operations. This is being incorporated into the organisation's overarching corporate strategy. What is the name given to this type of strategy development?
Correct Answer:B. bottom- up
Explanation:
Bottom-up strategy develops from operational knowledge and departmental proposals that influence wider business direction. Red Glass's operations team identifies cost and supply-chain improvements and these are incorporated into corporate strategy, an upward flow of ideas. Top-down planning operates in reverse, translating corporate choices into functional targets. Value engineering seeks appropriate function at lowest lifecycle cost, Lean removes waste, and structural operations decisions concern plant, capacity and network configuration. The distinguishing feature here is the origin and direction of strategy formation. Operations strategy connects the organisation's competitive position with decisions about resources and processes. Managers must distinguish qualifying standards from differentiating strengths and review the trade-offs among cost, quality, speed, dependability and flexibility. A change is valuable only when it improves the organisation's ability to deliver its chosen proposition. The appropriate selection is bottom- up. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. This distinction supports practical management decisions by linking the selected concept to defined requirements, suitable performance indicators and corrective action when results diverge from expectations.
Study Guide Reference: CIPS L5M9 -- Critically assess the objectives and strategies of operations management; the uploaded question bank cites study-guide page(s) 42.
Question 9
Which of the following would you require in order to calculate the availability of a piece of equipment used in manufacturing?
Correct Answer:B. mean time to repair
Explanation:
Inherent availability can be estimated from MTBF and MTTR: MTBF / (MTBF + MTTR). MTBF measures average operating time between failures, while MTTR measures average active repair time. If MTBF is 200 hours and MTTR four hours, inherent availability is approximately 98.04%. Reducing repair time or failure frequency improves the metric. Operational availability can additionally include waiting for parts, administrative delay and other downtime. Cost of repair, throughput and machine output are useful KPIs but not inputs to the specified calculation. Reliable operations depend on designing out avoidable faults and responding systematically when failures occur. Teams should capture defect and incident evidence, identify root causes and test corrective actions. A response that merely restores service without addressing repeat failure may increase long-term operating costs. The appropriate selection is mean time to repair. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. This distinction supports practical management decisions by linking the selected concept to defined requirements, suitable performance indicators and corrective action when results diverge from expectations.
Study Guide Reference: CIPS L5M9 -- Explain techniques in failure prevention and recovery that can be applied in operations management; the uploaded question bank cites study-guide page(s) 95.
Question 10
Below are details of five companies who operate a Total Quality Management System (TQM). For each company, select the system used and identify which area of the Balanced Scorecard this relates to.
Company 1: The focus of this company is to gather real-time data to assess the quality of products created during the manufacturing process. There are tight budgets and reworking any defects will affect the bottom line.
Company 2: This company is concerned about how their products are received. They have recently completed market research focused on their client's feelings. The objective is now to improve the product's look and performance to meet these expectations.
Company 3: The focus of this company is defining the customer requirements and translating this into a high-quality specification and effective operational process.
Company 4: Within this company there is a group of 6 employees who meet regularly with the objective of reducing issues that arise in the manufacturing of products.
Complete the table below by listing the TQM System used and the relevant Balanced Scorecard criteria for each company. Each response should only be used once: Quality Circle, Statistical Process Control, Kansei Engineering, Quality Function Deployment, Finance Criteria, Business Process Criteria, Learning and Growth Criteria, Customer Criteria.
Company
TQM technique
Balanced Scorecard perspective
Company 1
Box 1
Box 5
Company 2
Box 2
Box 6
Company 3
Box 3
Box 7
Company 4
Box 4
Box 8
Which of the following will you put into box 6?
Correct Answer:D. customer criteria
Explanation:
The customer perspective evaluates satisfaction, loyalty, retention and perceived value. Company 2 surveys customer feelings about appearance and performance, then adjusts design to meet those expectations. These are customer-centred goals, even when engineering teams perform the work. Kansei Engineering connects emotional preferences with product characteristics. Financial measures concern monetary outcomes, process measures examine execution and learning measures assess organisational capabilities. Customer preference and perceived product quality make the customer perspective the most appropriate category. A performance tool is valuable when it changes the quality of management decisions. Appropriate targets, reliable data capture and consistent interpretation are essential. Improvement proposals should be evaluated for their effect on customers, operational capability and cost rather than selected merely because a single indicator improves. The appropriate selection is customer criteria. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. Consistent measurement and periodic review are necessary to distinguish a sustained improvement from a temporary or misleading change.
Study Guide Reference: CIPS L5M9 -- Analyse tools for improving performance in operations management; the uploaded question bank cites study-guide page(s) 80.